November-2022

Maintenance Reliability & Rotating Equipment Engineering

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Dammam
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Maintenance Of Heavy Equipment

Performing routine maintenance on heavy equipment can keep costs down. Heavy equipment is a large investment and proper maintenance can keep the equipment running properly and significantly extend its useful life. Equipm ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Planned Shutdown, Critical Activities, Isolation, Start-up & Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Process Plant Optimization Technology and Continual Improvement

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Reliability Centered Maintenance (RCM) For FM Personnel

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Advanced Maintenance Planning And Scheduling & Shutdown, Turnaround And Outage

Maintenance planning and scheduling using structured and systematic approaches are critical for every successful plant. Maintenance planning and scheduling are the fastest and most effective investments that an organizat ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Alignment Methods & Application

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment. This comprehensive course trains the student in the need for precision shaft alignment and instructs in the popular method ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Process Plant Start-Up Commissioning And Troubleshooting

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

Read More
  • Dubai
  • 10 -Days
  • USD-8910
  • 27-11-2022
Register

Certified Reliability Proffessional-Introduction Workshop & Exam Preparation

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Introduction To Maintenance Of Aboveground Atmospheric Storage Tanks (API 653)

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Rotating Equipment Reliability Optimization & Continuous Improvement

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

Read More
  • Kuwait
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Fitness For Service Of Piping, Vessels & Tanks

This course explains all fundamental principles of fitness for service, their practical application through case histories, and a step by step evaluation process for each type of degradation mechanism. The course also gi ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 27-11-2022
Register

Certified Maintenance & Reliability Technician

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 28-11-2022
Register

Inspection, Repair & Maintenance Of Crude Oil Storage Tanks

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 28-11-2022
Register

December-2022

Building Preventive Maintenance

This training course presents the methods of inspection and evaluation of buildings and diagnosis and reason of concrete deterioration or the corrosion of the steel bars to develop preventive maintenance program. The cau ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Risk Based Strategies for Inspection & Maintenance

Risk-Based Inspection (RBI) methodology enables the assessment of the likelihood and potential consequences of pressure equipment failures. RBI provides companies the opportunity to prioritize their equipment for inspect ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Reliability Centred Maintenance & Total Productive Maintenance

Organisations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Optimizing Equipment Maintenance & Replacement Practices

Major world companies from the process and petrochemical industry have developed their maintenance practices based on the optimization of predictive maintenance management system. This approach works well for both statio ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 04-12-2022
Register

Practical Pump Technology (API 610) (Selection, Applications, Operation, Troubleshooting, And Maintenance)

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Condition Monitoring & Vibration Control Of Machines Plants

This training program is designed to provide valuable information on machine condition monitoring as a tool for quickly identifying and correcting the root causes of machinery problems, achieving precise operation, and i ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

MAINTENANCE PLANNING, SCHEDULING, AUDITING & BENCHMARKING

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Introduction To ASME Process Piping Code

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5450
  • 04-12-2022
Register

Practical Pump Technology

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Refinery Shutdown & Turnaround

Refineries extreme safety and continuous operation constriction requirements demand properly designed and executed shutdowns together with increase in efficiency with the use of latest technologies place massive importan ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5450
  • 04-12-2022
Register

Maintenance Of Gas Compressors

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

ADVANCED PIPELINE RISK MANAGEMENT

Risk management has been embraced by both the pipeline industry and regulatory agencies as a way to not only increase public safety but also to optimize all aspects of pipeline design, operations, and maintenance. This a ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Total Productive Maintenance Overview (TPM)

In today's manufacturing industries, more and more companies are seeking ways to improve their plant’s performance through the application of continuous improvement tools such as TPM. Although it originated from Japan, T ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5450
  • 04-12-2022
Register

Fleet Maintenance Management & Inspection

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5450
  • 04-12-2022
Register

Refractories Applications, Inspection and Maintenance

Refractories are considered the critical factor for the successful and reliable operation of many high-temperature industrial processes. They are often a major cost item both in general maintenance and also in terms of u ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5450
  • 04-12-2022
Register

Upstream Oil & Gas Asset Management

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Modern Maintenance Technologies Overview

This course provides all the delegates great opportunities to optimize the performance of their systems and equipment to achieve maximum return on investment (ROI). By reducing costs and downtime, while achieving high le ...

Read More
  • Muscat
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Protective Coatings Inspection, Maintenance & Repair Techniques

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 04-12-2022
Register

Applying Reliability Engineering Principles To Process Equipment Maintenance

The course is designed to bridge the gap between the rather theoretical subject of "Reliability Engineering" (RE) and day-to-day equipment maintenance practice by emphasizing the common goals of RE and Maintenance. It w ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 05-12-2022
Register

Advanced Gas TurbinesDesign, Troubleshooting, Maintenance & Inspection

Gas turbines became widely adopted and many thousands of sets are now installed worldwide. The development of gas turbine from the theoretical stage to its present worldwide adoption has three maim inputs.

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 05-12-2022
Register

Certified Asset Management Assessor (CAMA)

This 5 day workshop is designed to be a hands-on, stimulating experience. The program is highly interactive with many discussion and facilitated practice sessions. Key points will be emphasized with case study examples. ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 11-12-2022
Register

Integrity Management of Onshore & Offshore Pipelines

This BTS Integrity Management of Onshore & Offshore pipelines training course identifies the different strategies required to ensure that the integrity and reliability of pipelines is effectively managed throughout the e ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5450
  • 11-12-2022
Register

Certified Maintenance & Reliability Professional (CMRP) Certification

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Maintenance Management Developing & Enhancing Maintenance Strategies

This 5-day program initially looks at all of the core maintenance management disciplines that support effective work planning, scheduling and work control. The second week builds on the foundation knowledge introduced du ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Preventive & Predictive Maintenance

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Process Plant Start-Up And Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. An organisation’s personnel must familiarize themselves with new equipment, processes and technologies, deve ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Mechanical Integrity, Safety & Reliability In Refineries, Petrochemical & Process Plants

This course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil and gas plants and petrochemical plants. Principal emphasis is placed on the primary ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Rotating Equipment Maintenance And Troubleshooting

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Oil & Gas Production Equipment’s Operation, Diagnostics & Maintenance

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any oil and gas production operation. Good fabrication of these components, b ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Pumps, Compressors And Turbines Troubleshooting Training

This course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Practical Machinery Vibration Monitoring, Analysis & Predictive Maintenance

Vibration Analysis is one of the most powerful condition based maintenance technologies, and the cornerstone of many predictive maintenance programs. It is also widely utilized for troubleshooting and fault diagnosis of ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Corrosion Monitoring & Inspection Methods Control In Gas, Oil & Water

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Gas Transmission & Distribution Piping Systems (Conforms To ASME Code B31.8)

ASME B31.8 is the most widely used Code for the design, operation, maintenance, and repair of natural gas distribution and transmission pipelines. This course explains the present-day piping Code provisions, the princip ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Modern Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an 'engineering problem'. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busin ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Construction, Operations & Maintenance Management

The objective of the course is to provide an integrated program covering the key areas of Operations & Maintenance Management concerned with Planning, Scheduling and Total Productive Maintenance. The program aims to prov ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Failure Mode Effect and Criticality Analysis (FMECA) Facilitator Skills Training

This highly interactive BTS training course will focus on the essential skills for a FMECA facilitator, supported by tailor-made exercises and constructive personal feedback. This intensive training course will also enab ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Operation & Maintenance Of Mobile Lifting Equipment

This course will highlight the added value that mobile lifting equipment operation and maintenance can offer to support engineers and technicians working in heavy transportation and lifting, petroleum industries, and con ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Maintenance Of Valves & Testing Technology

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Fleet Maintenance & Replacement Optimizing Life-Cycle

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 11-12-2022
Register

Advanced Vibration Monitoring, Analysis & Balancing ( Bentley Nevada Application )

In today’s highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 12-12-2022
Register

Maintenance & Operation Of Rotating Equipment

This training program aims at providing the participants with a comprehensive theoretical and practical knowledge, and enhancing their skills for the maintenance and operation of rotating equipment. Emphasis shall be lai ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 14-12-2022
Register

Maintenance Audit And Site Inspection

This highly interactive training course enables you to develop a powerful vision for asset & maintenance management improvement and improve your abilities to successfully promote and adapt changes in the workplace. You w ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Certified Maintenance Planner AICP Certification Exam

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Building Services Management Best Practices Training program

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Maintenance Contracting & Outsourcing

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Effective Contractor Management in Maintenance & Technical Projects

This highly interactive Contractor Management training course will ensure that delegates understand how contractor management will fit in the Asset Management context - how to select the right contractor and contract typ ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Successful Maintenance Planning & Scheduling High Reliability & Maintenance Performance Techniques

This course is packed with the insights and the powerful techniques of successful maintenance planning and scheduling for high equipment reliability. The comprehensive content gives you best practice maintenance planning ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Reliability Centered Maintenance (RCM)

This course provides the fundamentals of Reliability-Centered Maintenance (RCM). The course is not process specific but gives the participant fundamental tools and knowledge required to participate in any RCM analysis pr ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Strategic Maintenance Planning

Leading companies view Maintenance as a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, and the cost of production. The ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Plant Reliability Modelling, Analysis And Prediction

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Plant Operation, Troubleshooting, And Maintenance

Industrial processes today operate on very large scales with the advent of modern industrial plants. Such plants sometimes operate hundreds of equipment, not to mention thousands of instruments for the measurement and co ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Pumps & Compressors Predictive Maintenance & Diagnostics

Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive unders ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Fundamentals Of Storage Tank Design, Construction & Maintenance

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 18-12-2022
Register

Pump System Optimization Overview

Pumping systems account for a significant portion of a facility's energy use in many industries. In the majority of pumping systems, energy added to the working fluid by the pump is much greater than required by the proc ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

RO Feed Pump Tech. & Maintenance

Tending to System Maintenance is Necessary for Successful Operation Understanding and reacting to the performance of a reverse osmosis (RO) system is necessary for continued successful operation. It is this interaction ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Advanced Reliability Centered Maintenance

Reliability Centred Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 18-12-2022
Register

Root Cause Failure Analysis (RCFA)

The world-leading companies don’t accept things going wrong. They proactively focus on finding and stopping problems from entering their business. They set control mechanisms and checkpoints in place to spot and stop the ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Rotating Equipment Controls And Operation

This course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus in the course will be on the start-up and ope ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Essential Methodologies For Maintenance

Why do we have safety or environmental incidents? Why do we suffer mission failures or production shortfalls? Is there a relationship between maintenance and system availability? Can you improve operational performance a ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Maintenance Planning And Scheduling For Reliability

This course covers the vital skills and important insights a Maintenance Planner needs in order to plan, prepare and deliver world class maintenance and reliability results. In the maintenance scheduling training modules ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Introduction To Reliability Engineering

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Steam Turbine Control And Maintenance

Upon completion of this course, participants will have gained a thorough understanding of the various steam turbine configurations available to virtually every industrial user. Items discussed include mechanical design f ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Rotating Equipment Start Up, Operation, Maintenance & Troubleshooting

Rotating Equipment's are the pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting has tre ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Steam Turbine Operation

Steam Turbines of several types, which have widely varying configurations and applications, are used extensively in the process industries. These steam turbines represent a significant part of the capital and operating c ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)

Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 18-12-2022
Register

Advanced Maintenance Planning

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 19-12-2022
Register

Pump Technology Pump Overhauling

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Maintenance & Reliability Best Practices & Cost Effective Implementation

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Planned Shutdown, Critical Activities, Isolation, Start-up & Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Industrial Applied Reliability Engineering

This course is for operations and maintenance managers, engineers, and supervisors who want practical solutions and techniques to lift the efficiency, productivity and output of their production and operating assets. The ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Hot Tapping and Plugging in Petroleum Industries

This interactive, applications-driven 5-day training course will highlight the added value that Hot Tapping and Plugging practices advised by API standards can offer to support engineers and technicians working in pipeli ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an engineering problem. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busines ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Total Productive Maintenance (TPM)

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Mechanical Equipment Compressors, Pumps,Seals, Motors, And Variable – Speed Drives.

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5450
  • 25-12-2022
Register

Optimizing Equipment Maintenance And Replacement Decisions Training

• Is your equipment (fixed or mobile) failing before planned replacement? • Are you unable to execute maintenance tasks because spare parts are not available? • Have you made significant investment in CBM methods and t ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Heat Transfer Equipment

Heat Transfer Equipment or Heat Exchangers simply exchange heat and involves in heat transfer. Fluids or gases are introduced inside the shell side nozzle inlet. Fluids or gases then go through the shell moving through a ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Introduction To Valves Selection, Maintenance & Repair

Within the boiler, piping and pressure vessel industry, control and safety relief are of most essential importance. Pressure relief valves are the last line of defense against catastrophic failure or even loss of life. T ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Computerized Maintenance Management Systems (CMMS Success Strategy)

This course is intended to show how Advanced Maintenance Techniques to a Successful Strategy in implementation of a Computer Maintenance Management System. This is for the participant who is looking for ways to get more ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 25-12-2022
Register

Maintenance Of Centrifugal Pumps

The course will introduce delegates to the different types of pumps and their associated terminology. Centrifugal pumps, packing, mechanical seals and sealing systems, bearings and couplings will all be discussed. The ap ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Maintenance Of Process Plant And Equipment

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Practical Hydraulic Systems Operation And Troubleshooting

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Heavy Equipment Operation, Maintenance & Safety

Working with heavy equipments is a very dangerous task and there are several dangers associated with them. This program provides training in the operation of heavy equipment, routine maintenance of machinery and field op ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Gas Compressors Maintenance & Monitoring Of Operation & Performance

This course will present the key activities involved in operation, control, maintenance and troubleshooting of gas compressors. These activities are vitally important for the efficient and safe operation of the plant. Th ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 25-12-2022
Register

Introduction To Lean Six Sigma Processes

This popular course will provide you with a broad understanding of the Lean Six Sigma improvement methodology, concepts, and language. The course is targeted at team members who need to develop a general awareness of Lea ...

Read More
  • Cairo
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Advanced Transport & Fleet Management

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5450
  • 25-12-2022
Register

Practical Valve Technology Selection, Operation, Maintenance And Troubleshooting

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

Read More
  • Salalah
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Pipeline Operations And Maintenance

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this course is to present basic characteristics of efficient operation of pipelines in various engineering app ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Optimizing Equipment & Facilities Maintenance

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

STEAM TURBINE FAILURE ANALYSIS INSPECTION AND TROUBLESHOOTING

This Course Has Been Designed for Individuals Who is Familiar with Steam Turbine to Understand and be able to make decisions relating for Steam Turbine Failure Analysis Inspection and Troubleshooting Maintenance and Over ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5450
  • 25-12-2022
Register

Oil & Gas Platform Supervisory

This training course will cover the methods of supervision of operations and the development of an effective process. The principles of distillation, hydraulics, phase separation, and heat transfer, as they apply to proc ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

Reliability Centered Maintenance Overview

Risk-Based Reliability Centered Maintenance (RCM) sets out to highlight and formalize the identification, categorization and management of risk as part of the development of failure management and maintenance management ...

Read More
  • Dubai
  • 5 -Days
  • USD-4950
  • 25-12-2022
Register

January-2023

Maintenance Of Process Plant And Equipment

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Maintenance, Reliability & Asset Management Technology Best Practices

Maintenance, Reliability and Asset Management Best Practices are critical for every successful individual and company. It is the job of the maintenance professional to optimize the maintenance effort using a structured a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Upstream Oil & Gas Asset Management

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Integrity Management of Onshore & Offshore Pipelines

This BTS Integrity Management of Onshore & Offshore pipelines training course identifies the different strategies required to ensure that the integrity and reliability of pipelines is effectively managed throughout the e ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Gas Transmission & Distribution Piping Systems (Conforms To ASME Code B31.8)

ASME B31.8 is the most widely used Code for the design, operation, maintenance, and repair of natural gas distribution and transmission pipelines. This course explains the present-day piping Code provisions, the princip ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Total Productive Maintenance Overview (TPM)

In today's manufacturing industries, more and more companies are seeking ways to improve their plant’s performance through the application of continuous improvement tools such as TPM. Although it originated from Japan, T ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Reliability Centered Maintenance Overview

Risk-Based Reliability Centered Maintenance (RCM) sets out to highlight and formalize the identification, categorization and management of risk as part of the development of failure management and maintenance management ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Introduction To Valves Selection, Maintenance & Repair

Within the boiler, piping and pressure vessel industry, control and safety relief are of most essential importance. Pressure relief valves are the last line of defense against catastrophic failure or even loss of life. T ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Couplings & Shaft Alignment

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or t ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Optimizing Equipment Maintenance And Replacement Decisions Training

• Is your equipment (fixed or mobile) failing before planned replacement? • Are you unable to execute maintenance tasks because spare parts are not available? • Have you made significant investment in CBM methods and t ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Operation, Diagnostics and Maintenance of Equipment for Oil & Gas Production

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Advanced Transport & Fleet Management

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Advanced Gas TurbinesDesign, Troubleshooting, Maintenance & Inspection

Gas turbines became widely adopted and many thousands of sets are now installed worldwide. The development of gas turbine from the theoretical stage to its present worldwide adoption has three maim inputs.

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 01-01-2023
Register

Oil & Gas Production Equipment’s Operation, Diagnostics & Maintenance

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any oil and gas production operation. Good fabrication of these components, b ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5950
  • 02-01-2023
Register

Practical Valve Technology Selection, Operation, Maintenance And Troubleshooting

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Fleet Maintenance & Replacement Optimizing Life-Cycle

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Optimizing Equipment Maintenance & Replacement Practices

Major world companies from the process and petrochemical industry have developed their maintenance practices based on the optimization of predictive maintenance management system. This approach works well for both statio ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Practical Hydraulic Systems Operation And Troubleshooting

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Gas Compressors Maintenance & Monitoring Of Operation & Performance

This course will present the key activities involved in operation, control, maintenance and troubleshooting of gas compressors. These activities are vitally important for the efficient and safe operation of the plant. Th ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Reliability Excellence For Managers Workshop

Reliability Excellence for Managers (RxM) teaches the true meaning of reliability, as well as the tools and processes required to develop, implement and sustain world-class reliability-based performance and a culture of ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Heavy Equipment Operation, Maintenance & Safety

Working with heavy equipments is a very dangerous task and there are several dangers associated with them. This program provides training in the operation of heavy equipment, routine maintenance of machinery and field op ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Computerized Maintenance Management Systems (CMMS Success Strategy)

This course is intended to show how Advanced Maintenance Techniques to a Successful Strategy in implementation of a Computer Maintenance Management System. This is for the participant who is looking for ways to get more ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Maintenance Engineering A Modern Approach

At the end of this course the attendees will gain the knowledge about maintenance, computerized maintenance programs & maintenance planning basic concepts including maintenance background overview and the human factor in ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Maintenance Of Valves & Testing Technology

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Maintenance & Reliability Best Practices & Cost Effective Implementation

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Advanced Reliability Centered Maintenance

Reliability Centred Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

MAINTENANCE PLANNING, SCHEDULING, AUDITING & BENCHMARKING

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Certified Maintenance & Reliability Technician

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Rotating Equipment Reliability Optimization & Continuous Improvement

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Introduction To ASME Process Piping Code

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Modern Maintenance Technologies Overview

This course provides all the delegates great opportunities to optimize the performance of their systems and equipment to achieve maximum return on investment (ROI). By reducing costs and downtime, while achieving high le ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Pumps & Compressors Predictive Maintenance & Diagnostics

Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive unders ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 08-01-2023
Register

Process Plant Start-Up Commissioning And Troubleshooting

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

Read More
  • Dubai
  • 10 -Days
  • USD-9810
  • 08-01-2023
Register

Performance Monitoring Of Pumps & Compressors

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Building Services Management Best Practices Training program

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Design & Fabrication Of Storage Tanks In Accordance With API 650

This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Total Productive Maintenance (TPM)

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Protective Coatings Inspection, Maintenance & Repair Techniques

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Successful Maintenance Planning & Scheduling High Reliability & Maintenance Performance Techniques

This course is packed with the insights and the powerful techniques of successful maintenance planning and scheduling for high equipment reliability. The comprehensive content gives you best practice maintenance planning ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an engineering problem. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busines ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Alignment Methods & Application

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment. This comprehensive course trains the student in the need for precision shaft alignment and instructs in the popular method ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Maintenance Reliability & Rotating Equipment Engineering

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Refinery Shutdown & Turnaround

Refineries extreme safety and continuous operation constriction requirements demand properly designed and executed shutdowns together with increase in efficiency with the use of latest technologies place massive importan ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Introduction To Reliability Engineering

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Preventive & Predictive Maintenance (PPM)

Preventive and predictive maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools and equipment. The sudden troubles are very potential th ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Corrosion Monitoring & Inspection Methods Control In Gas, Oil & Water

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

RO Feed Pump Tech. & Maintenance

Tending to System Maintenance is Necessary for Successful Operation Understanding and reacting to the performance of a reverse osmosis (RO) system is necessary for continued successful operation. It is this interaction ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Certified Reliability Proffessional-Introduction Workshop & Exam Preparation

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Effective Contractor Management in Maintenance & Technical Projects

This highly interactive Contractor Management training course will ensure that delegates understand how contractor management will fit in the Asset Management context - how to select the right contractor and contract typ ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Reliability Centered Maintenance (RCM) For FM Personnel

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 15-01-2023
Register

Advanced Practical Pumping Technology

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 16-01-2023
Register

Plant Operation, Troubleshooting, And Maintenance

Industrial processes today operate on very large scales with the advent of modern industrial plants. Such plants sometimes operate hundreds of equipment, not to mention thousands of instruments for the measurement and co ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 16-01-2023
Register

FPSO Operation And Maintenance (Floating Production Storage And Offloading)

For the successful operation of the FPSO it is of vital importance to understand the process from the wellhead through the topside process, storage and offload. Often putting together an operations team receives scarce p ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 16-01-2023
Register

Mechanical Equipment Compressors, Pumps,Seals, Motors, And Variable – Speed Drives.

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Maintenance & Operation Of Rotating Equipment

This training program aims at providing the participants with a comprehensive theoretical and practical knowledge, and enhancing their skills for the maintenance and operation of rotating equipment. Emphasis shall be lai ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Failure Mode Effect and Criticality Analysis (FMECA) Facilitator Skills Training

This highly interactive BTS training course will focus on the essential skills for a FMECA facilitator, supported by tailor-made exercises and constructive personal feedback. This intensive training course will also enab ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Implementing Effective Preventive And Predictive Maintenance

Effectively planned Preventive & Predictive Maintenance which is integrated with the workflow is critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM, TPM, and even ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Maintenance Management Developing & Enhancing Maintenance Strategies

This 5-day program initially looks at all of the core maintenance management disciplines that support effective work planning, scheduling and work control. The second week builds on the foundation knowledge introduced du ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Applying Reliability Engineering Principles To Process Equipment Maintenance

The course is designed to bridge the gap between the rather theoretical subject of "Reliability Engineering" (RE) and day-to-day equipment maintenance practice by emphasizing the common goals of RE and Maintenance. It w ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Onshore Pipeline Engineering Design, Construction & Maintenance

Pipelines are a major asset in most Oil & Gas operators, and ensuring its functionality and effectiveness is a paramount operation and business requirement. This Onshore Pipeline Engineering: Design, Construction and Ma ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Plant Reliability Modelling, Analysis And Prediction

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Maintenance Errors Understanding, Identifying and Managing the Human Factor

Human factors are by far the largest cause of failures and incidents in maintenance. This goes not only for branches like aviation, but also for chemicals, oil & gas, energy and transportation. Investigation shows that a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Cost Effective Maintenance Management Driving Maintenance Performance To A Higher Level

Cost Effective Maintenance Management is an advanced maintenance management program that builds on the concepts introduced in other maintenance management programs such as Maintenance Work Planning and Control. Cost Eff ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Fitness For Service Of Piping, Vessels & Tanks

This course explains all fundamental principles of fitness for service, their practical application through case histories, and a step by step evaluation process for each type of degradation mechanism. The course also gi ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

ADVANCED PIPELINE RISK MANAGEMENT

Risk management has been embraced by both the pipeline industry and regulatory agencies as a way to not only increase public safety but also to optimize all aspects of pipeline design, operations, and maintenance. This a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Rotating Equipment Start Up, Operation, Maintenance & Troubleshooting

Rotating Equipment's are the pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting has tre ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Practical Pump Technology

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 22-01-2023
Register

Writing Effective Maintenance Procedures

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 23-01-2023
Register

Operational Excellence Masterclass (OE)

This comprehensive course includes the work processes and the business systems needed to coordinate and achieve maximum production plant and equipment performance. You will find out how to institute the vital practices a ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 23-01-2023
Register

Certified Asset Management Assessor (CAMA)

This 5 day workshop is designed to be a hands-on, stimulating experience. The program is highly interactive with many discussion and facilitated practice sessions. Key points will be emphasized with case study examples. ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Process Plant Start-Up And Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. An organisation’s personnel must familiarize themselves with new equipment, processes and technologies, deve ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Advanced Vibration Monitoring, Analysis & Balancing ( Bentley Nevada Application )

In today’s highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Pump Technology Pump Overhauling

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

STEAM TURBINE FAILURE ANALYSIS INSPECTION AND TROUBLESHOOTING

This Course Has Been Designed for Individuals Who is Familiar with Steam Turbine to Understand and be able to make decisions relating for Steam Turbine Failure Analysis Inspection and Troubleshooting Maintenance and Over ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Maintenance Planning And Scheduling For Reliability

This course covers the vital skills and important insights a Maintenance Planner needs in order to plan, prepare and deliver world class maintenance and reliability results. In the maintenance scheduling training modules ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Valve Selection, Maintenance & Repair Masterclass

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

Rotating Equipment Controls And Operation

This course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus in the course will be on the start-up and ope ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 29-01-2023
Register

February-2023

Modern Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an 'engineering problem'. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busin ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Industrial Applied Reliability Engineering

This course is for operations and maintenance managers, engineers, and supervisors who want practical solutions and techniques to lift the efficiency, productivity and output of their production and operating assets. The ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Root Cause Failure Analysis (RCFA)

The world-leading companies don’t accept things going wrong. They proactively focus on finding and stopping problems from entering their business. They set control mechanisms and checkpoints in place to spot and stop the ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Advanced Maintenance Leadership & Technology

When done well your maintenance strategies deliver the six purposes of maintenance, equipment reliability, failure avoidance, defect elimination, least operating costs, risk reduction and maximum production. Fail to do a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Condition Monitoring & Vibration Control Of Machines Plants

This training program is designed to provide valuable information on machine condition monitoring as a tool for quickly identifying and correcting the root causes of machinery problems, achieving precise operation, and i ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Introduction To Maintenance Of Aboveground Atmospheric Storage Tanks (API 653)

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Pipeline Operations And Maintenance

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this course is to present basic characteristics of efficient operation of pipelines in various engineering app ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

DATA ANALYSIS TECHNIQUES FOR ENGINEERS & TECHNOLOGISTS

Corporate ethos which sees change as a survival necessity coupled with continual demands to achieve greater production efficiencies and reduced operating / maintenance costs, means that engineers and technologists are fa ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Screw Gas Compressors & Dry Gas Seals Application

This 5-day course offers delegates a comprehensive overview of the design, construction, control and operation of screw compressors of the type normally found in the oil, gas, and other process industries. The course de ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Reliability Centred Maintenance & Total Productive Maintenance

Organisations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Strategic Maintenance Planning

Leading companies view Maintenance as a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, and the cost of production. The ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Planned Shutdown, Critical Activities, Isolation, Start-up & Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Process Plant Optimization Technology and Continual Improvement

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Effective Planned Preventive & Predictive Maintenance

Effective planned & predictive maintenance are critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM TPM, and even 6-Sigma. This course has been designed to benefit ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Refractories Applications, Inspection and Maintenance

Refractories are considered the critical factor for the successful and reliable operation of many high-temperature industrial processes. They are often a major cost item both in general maintenance and also in terms of u ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Maintenance Of Centrifugal Pumps

The course will introduce delegates to the different types of pumps and their associated terminology. Centrifugal pumps, packing, mechanical seals and sealing systems, bearings and couplings will all be discussed. The ap ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Fleet Maintenance Management & Inspection

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Hot Tapping and Plugging in Petroleum Industries

This interactive, applications-driven 5-day training course will highlight the added value that Hot Tapping and Plugging practices advised by API standards can offer to support engineers and technicians working in pipeli ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-02-2023
Register

Certified Maintenance & Reliability Professional (CMRP) Certification

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

MAINTENANCE TASK ANALYSIS (MTA)

MTA is the identification of the steps, spares and materials, tools, support equipment, personnel skill levels as well as any facility issues that must be considered for a given repair task. Also included in the MTA are ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Maintenance Optimization & Best Practices

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Maintenance Audit And Site Inspection

This highly interactive training course enables you to develop a powerful vision for asset & maintenance management improvement and improve your abilities to successfully promote and adapt changes in the workplace. You w ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Oil & Gas Platform Supervisory

This training course will cover the methods of supervision of operations and the development of an effective process. The principles of distillation, hydraulics, phase separation, and heat transfer, as they apply to proc ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Introduction To Lean Six Sigma Processes

This popular course will provide you with a broad understanding of the Lean Six Sigma improvement methodology, concepts, and language. The course is targeted at team members who need to develop a general awareness of Lea ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)

Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Practical Machinery Vibration Monitoring, Analysis & Predictive Maintenance

Vibration Analysis is one of the most powerful condition based maintenance technologies, and the cornerstone of many predictive maintenance programs. It is also widely utilized for troubleshooting and fault diagnosis of ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

MARK V, MARK VIE and Gas Turbine

Working with General Electrical “GE” control systems and gas turbine at facilities, attendees in this “hands-on” course will learn the main differences between control system series “MARK V,VI,VIE” , how ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Heat Transfer Equipment

Heat Transfer Equipment or Heat Exchangers simply exchange heat and involves in heat transfer. Fluids or gases are introduced inside the shell side nozzle inlet. Fluids or gases then go through the shell moving through a ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 12-02-2023
Register

Pump System Optimization Overview

Pumping systems account for a significant portion of a facility's energy use in many industries. In the majority of pumping systems, energy added to the working fluid by the pump is much greater than required by the proc ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Maintenance Contracting & Outsourcing

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Fundamentals Of Storage Tank Design, Construction & Maintenance

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Power Generation Gas Turbines, Co-Generation, Combined Cycle Plants, Wind Power Generation And Solar Power

This programme provides a detailed understanding of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants. Each of the components such as compressors, gas and ste ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Turnaround Best Practices – Planning, Scheduling And Management Of Shutdowns

This course will introduce participants to proven practices that have been successfully applied in 19 key turnaround areas. The practices for any one area are a composite of practices that have been successfully used by ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Motor Vehicle Maintenance & Inspection

Proper maintenance includes, among other things, ensuring that lamps and reflectors are working, and tires are not worn. Some example roadside safety violations that may cause road accidents include operating an out-of-s ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Advanced Maintenance Planning And Scheduling & Shutdown, Turnaround And Outage

Maintenance planning and scheduling using structured and systematic approaches are critical for every successful plant. Maintenance planning and scheduling are the fastest and most effective investments that an organizat ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Inspection, Repair & Maintenance Of Crude Oil Storage Tanks

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Construction, Operations & Maintenance Management

The objective of the course is to provide an integrated program covering the key areas of Operations & Maintenance Management concerned with Planning, Scheduling and Total Productive Maintenance. The program aims to prov ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Certified Maintenance Planner AICP Certification Exam

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Mechanical Integrity, Safety & Reliability In Refineries, Petrochemical & Process Plants

This course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil and gas plants and petrochemical plants. Principal emphasis is placed on the primary ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

HVAC Design, Operation, and Maintenance

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Pumps, Compressors And Turbines Troubleshooting Training

This course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 19-02-2023
Register

Optimizing Equipment & Facilities Maintenance

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Risk Based Strategies for Inspection & Maintenance

Risk-Based Inspection (RBI) methodology enables the assessment of the likelihood and potential consequences of pressure equipment failures. RBI provides companies the opportunity to prioritize their equipment for inspect ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Essential Methodologies For Maintenance

Why do we have safety or environmental incidents? Why do we suffer mission failures or production shortfalls? Is there a relationship between maintenance and system availability? Can you improve operational performance a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Managing Shutdowns, Turnarounds And Outages

Planning and managing shutdowns, turnarounds and outages in the process plant environment is a complex and demanding function. If turnarounds are not properly planned, managed and controlled, companies run the risks of s ...

Read More
  • Dammam
  • 5 -Days
  • SAR-5450
  • 26-02-2023
Register

Maintenance Of Heavy Equipment

Performing routine maintenance on heavy equipment can keep costs down. Heavy equipment is a large investment and proper maintenance can keep the equipment running properly and significantly extend its useful life. Equipm ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Operation & Maintenance Of Mobile Lifting Equipment

This course will highlight the added value that mobile lifting equipment operation and maintenance can offer to support engineers and technicians working in heavy transportation and lifting, petroleum industries, and con ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Advanced Practical Centrifugal Pump

The over-riding aim of the pump and system training course is to reduce the costs associate with owning and running pumps. Organizations spend millions running and repairing pumps. Nine out of ten pumps fails early. If w ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

Preventive & Predictive Maintenance

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 26-02-2023
Register

March-2023

Rotating Equipment Maintenance And Troubleshooting

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Equipment Losses & Overall Equipment Effectiveness (OEE)

OEE is the primary measure of performance in TPM. It is calculated by multiplying the availability, efficiency and quality rate of an equipment. This course allows us to understand the 7 major equipment losses encountere ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Steam Turbine Operation

Steam Turbines of several types, which have widely varying configurations and applications, are used extensively in the process industries. These steam turbines represent a significant part of the capital and operating c ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Practical Pump Technology (API 610) (Selection, Applications, Operation, Troubleshooting, And Maintenance)

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Building Preventive Maintenance

This training course presents the methods of inspection and evaluation of buildings and diagnosis and reason of concrete deterioration or the corrosion of the steel bars to develop preventive maintenance program. The cau ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Steam Turbine Control And Maintenance

Upon completion of this course, participants will have gained a thorough understanding of the various steam turbine configurations available to virtually every industrial user. Items discussed include mechanical design f ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Maintenance Of Gas Compressors

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Pipeline Repair Techniques

The various aspects of pipeline repair using weld and non-weld methods will be covered, as will the concerns for welding onto in-service pipelines and the approaches used to address them.

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Advanced Maintenance Planning

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 05-03-2023
Register

Operational Excellence Masterclass (OE)

This comprehensive course includes the work processes and the business systems needed to coordinate and achieve maximum production plant and equipment performance. You will find out how to institute the vital practices a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 12-03-2023
Register

Reliability Centered Maintenance (RCM)

This course provides the fundamentals of Reliability-Centered Maintenance (RCM). The course is not process specific but gives the participant fundamental tools and knowledge required to participate in any RCM analysis pr ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 12-03-2023
Register

April-2023

Certified Reliability Proffessional-Introduction Workshop & Exam Preparation

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 30-04-2023
Register

Alignment Methods & Application

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment. This comprehensive course trains the student in the need for precision shaft alignment and instructs in the popular method ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 30-04-2023
Register

Maintenance & Operation Of Rotating Equipment

This training program aims at providing the participants with a comprehensive theoretical and practical knowledge, and enhancing their skills for the maintenance and operation of rotating equipment. Emphasis shall be lai ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 30-04-2023
Register

May-2023

Building Services Management Best Practices Training program

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Advanced Gas TurbinesDesign, Troubleshooting, Maintenance & Inspection

Gas turbines became widely adopted and many thousands of sets are now installed worldwide. The development of gas turbine from the theoretical stage to its present worldwide adoption has three maim inputs.

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Total Productive Maintenance (TPM)

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Refinery Shutdown & Turnaround

Refineries extreme safety and continuous operation constriction requirements demand properly designed and executed shutdowns together with increase in efficiency with the use of latest technologies place massive importan ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Couplings & Shaft Alignment

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or t ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Maintenance, Reliability & Asset Management Technology Best Practices

Maintenance, Reliability and Asset Management Best Practices are critical for every successful individual and company. It is the job of the maintenance professional to optimize the maintenance effort using a structured a ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Process Plant Start-Up Commissioning And Troubleshooting

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

Read More
  • Cairo
  • 10 -Days
  • USD-9810
  • 07-05-2023
Register

Plant Reliability Modelling, Analysis And Prediction

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

MARK V, MARK VIE and Gas Turbine

Working with General Electrical “GE” control systems and gas turbine at facilities, attendees in this “hands-on” course will learn the main differences between control system series “MARK V,VI,VIE” , how ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Operation, Diagnostics and Maintenance of Equipment for Oil & Gas Production

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Upstream Oil & Gas Asset Management

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Fleet Maintenance & Replacement Optimizing Life-Cycle

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Advanced Practical Pumping Technology

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Introduction To Reliability Engineering

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Applying Reliability Engineering Principles To Process Equipment Maintenance

The course is designed to bridge the gap between the rather theoretical subject of "Reliability Engineering" (RE) and day-to-day equipment maintenance practice by emphasizing the common goals of RE and Maintenance. It w ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Gas Compressors Maintenance & Monitoring Of Operation & Performance

This course will present the key activities involved in operation, control, maintenance and troubleshooting of gas compressors. These activities are vitally important for the efficient and safe operation of the plant. Th ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Maintenance & Reliability Best Practices & Cost Effective Implementation

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

DATA ANALYSIS TECHNIQUES FOR ENGINEERS & TECHNOLOGISTS

Corporate ethos which sees change as a survival necessity coupled with continual demands to achieve greater production efficiencies and reduced operating / maintenance costs, means that engineers and technologists are fa ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 07-05-2023
Register

Implementing Effective Preventive And Predictive Maintenance

Effectively planned Preventive & Predictive Maintenance which is integrated with the workflow is critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM, TPM, and even ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5950
  • 08-05-2023
Register

MAINTENANCE PLANNING, SCHEDULING, AUDITING & BENCHMARKING

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Failure Mode Effect and Criticality Analysis (FMECA) Facilitator Skills Training

This highly interactive BTS training course will focus on the essential skills for a FMECA facilitator, supported by tailor-made exercises and constructive personal feedback. This intensive training course will also enab ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Mechanical Equipment Compressors, Pumps,Seals, Motors, And Variable – Speed Drives.

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Introduction To ASME Process Piping Code

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Optimizing Equipment Maintenance & Replacement Practices

Major world companies from the process and petrochemical industry have developed their maintenance practices based on the optimization of predictive maintenance management system. This approach works well for both statio ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Onshore Pipeline Engineering Design, Construction & Maintenance

Pipelines are a major asset in most Oil & Gas operators, and ensuring its functionality and effectiveness is a paramount operation and business requirement. This Onshore Pipeline Engineering: Design, Construction and Ma ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Integrity Management of Onshore & Offshore Pipelines

This BTS Integrity Management of Onshore & Offshore pipelines training course identifies the different strategies required to ensure that the integrity and reliability of pipelines is effectively managed throughout the e ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Pumps & Compressors Predictive Maintenance & Diagnostics

Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive unders ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Reliability Centered Maintenance (RCM) For FM Personnel

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Computerized Maintenance Management Systems (CMMS Success Strategy)

This course is intended to show how Advanced Maintenance Techniques to a Successful Strategy in implementation of a Computer Maintenance Management System. This is for the participant who is looking for ways to get more ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

RO Feed Pump Tech. & Maintenance

Tending to System Maintenance is Necessary for Successful Operation Understanding and reacting to the performance of a reverse osmosis (RO) system is necessary for continued successful operation. It is this interaction ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Certified Asset Management Assessor (CAMA)

This 5 day workshop is designed to be a hands-on, stimulating experience. The program is highly interactive with many discussion and facilitated practice sessions. Key points will be emphasized with case study examples. ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Screw Gas Compressors & Dry Gas Seals Application

This 5-day course offers delegates a comprehensive overview of the design, construction, control and operation of screw compressors of the type normally found in the oil, gas, and other process industries. The course de ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Advanced Reliability Centered Maintenance

Reliability Centred Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Successful Maintenance Planning & Scheduling High Reliability & Maintenance Performance Techniques

This course is packed with the insights and the powerful techniques of successful maintenance planning and scheduling for high equipment reliability. The comprehensive content gives you best practice maintenance planning ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Introduction To Valves Selection, Maintenance & Repair

Within the boiler, piping and pressure vessel industry, control and safety relief are of most essential importance. Pressure relief valves are the last line of defense against catastrophic failure or even loss of life. T ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Maintenance Management Developing & Enhancing Maintenance Strategies

This 5-day program initially looks at all of the core maintenance management disciplines that support effective work planning, scheduling and work control. The second week builds on the foundation knowledge introduced du ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Maintenance Of Process Plant And Equipment

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 14-05-2023
Register

Performance Monitoring Of Pumps & Compressors

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Corrosion Monitoring & Inspection Methods Control In Gas, Oil & Water

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

FPSO Operation And Maintenance (Floating Production Storage And Offloading)

For the successful operation of the FPSO it is of vital importance to understand the process from the wellhead through the topside process, storage and offload. Often putting together an operations team receives scarce p ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Maintenance Errors Understanding, Identifying and Managing the Human Factor

Human factors are by far the largest cause of failures and incidents in maintenance. This goes not only for branches like aviation, but also for chemicals, oil & gas, energy and transportation. Investigation shows that a ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Rotating Equipment Reliability Optimization & Continuous Improvement

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Practical Hydraulic Systems Operation And Troubleshooting

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Advanced Vibration Monitoring, Analysis & Balancing ( Bentley Nevada Application )

In today’s highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Practical Pump Technology

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Preventive & Predictive Maintenance (PPM)

Preventive and predictive maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools and equipment. The sudden troubles are very potential th ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Reliability Excellence For Managers Workshop

Reliability Excellence for Managers (RxM) teaches the true meaning of reliability, as well as the tools and processes required to develop, implement and sustain world-class reliability-based performance and a culture of ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Effective Contractor Management in Maintenance & Technical Projects

This highly interactive Contractor Management training course will ensure that delegates understand how contractor management will fit in the Asset Management context - how to select the right contractor and contract typ ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Reliability Centered Maintenance Overview

Risk-Based Reliability Centered Maintenance (RCM) sets out to highlight and formalize the identification, categorization and management of risk as part of the development of failure management and maintenance management ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Maintenance Engineering A Modern Approach

At the end of this course the attendees will gain the knowledge about maintenance, computerized maintenance programs & maintenance planning basic concepts including maintenance background overview and the human factor in ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Pump Technology Pump Overhauling

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Maintenance Of Valves & Testing Technology

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 21-05-2023
Register

Introduction To Lean Six Sigma Processes

This popular course will provide you with a broad understanding of the Lean Six Sigma improvement methodology, concepts, and language. The course is targeted at team members who need to develop a general awareness of Lea ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Industrial Applied Reliability Engineering

This course is for operations and maintenance managers, engineers, and supervisors who want practical solutions and techniques to lift the efficiency, productivity and output of their production and operating assets. The ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Advanced Transport & Fleet Management

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Certified Maintenance & Reliability Technician

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Cost Effective Maintenance Management Driving Maintenance Performance To A Higher Level

Cost Effective Maintenance Management is an advanced maintenance management program that builds on the concepts introduced in other maintenance management programs such as Maintenance Work Planning and Control. Cost Eff ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Condition Monitoring & Vibration Control Of Machines Plants

This training program is designed to provide valuable information on machine condition monitoring as a tool for quickly identifying and correcting the root causes of machinery problems, achieving precise operation, and i ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Writing Effective Maintenance Procedures

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Gas Transmission & Distribution Piping Systems (Conforms To ASME Code B31.8)

ASME B31.8 is the most widely used Code for the design, operation, maintenance, and repair of natural gas distribution and transmission pipelines. This course explains the present-day piping Code provisions, the princip ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an engineering problem. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busines ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

ADVANCED PIPELINE RISK MANAGEMENT

Risk management has been embraced by both the pipeline industry and regulatory agencies as a way to not only increase public safety but also to optimize all aspects of pipeline design, operations, and maintenance. This a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 28-05-2023
Register

Rotating Equipment Start Up, Operation, Maintenance & Troubleshooting

Rotating Equipment's are the pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting has tre ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 29-05-2023
Register

June-2023

Construction, Operations & Maintenance Management

The objective of the course is to provide an integrated program covering the key areas of Operations & Maintenance Management concerned with Planning, Scheduling and Total Productive Maintenance. The program aims to prov ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Advanced Maintenance Leadership & Technology

When done well your maintenance strategies deliver the six purposes of maintenance, equipment reliability, failure avoidance, defect elimination, least operating costs, risk reduction and maximum production. Fail to do a ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Plant Operation, Troubleshooting, And Maintenance

Industrial processes today operate on very large scales with the advent of modern industrial plants. Such plants sometimes operate hundreds of equipment, not to mention thousands of instruments for the measurement and co ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Inspection, Repair & Maintenance Of Crude Oil Storage Tanks

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Practical Valve Technology Selection, Operation, Maintenance And Troubleshooting

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Root Cause Failure Analysis (RCFA)

The world-leading companies don’t accept things going wrong. They proactively focus on finding and stopping problems from entering their business. They set control mechanisms and checkpoints in place to spot and stop the ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Reliability Centred Maintenance & Total Productive Maintenance

Organisations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Planned Shutdown, Critical Activities, Isolation, Start-up & Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Maintenance Planning And Scheduling For Reliability

This course covers the vital skills and important insights a Maintenance Planner needs in order to plan, prepare and deliver world class maintenance and reliability results. In the maintenance scheduling training modules ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Fundamentals Of Storage Tank Design, Construction & Maintenance

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Practical Machinery Vibration Monitoring, Analysis & Predictive Maintenance

Vibration Analysis is one of the most powerful condition based maintenance technologies, and the cornerstone of many predictive maintenance programs. It is also widely utilized for troubleshooting and fault diagnosis of ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Hot Tapping and Plugging in Petroleum Industries

This interactive, applications-driven 5-day training course will highlight the added value that Hot Tapping and Plugging practices advised by API standards can offer to support engineers and technicians working in pipeli ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Total Productive Maintenance Overview (TPM)

In today's manufacturing industries, more and more companies are seeking ways to improve their plant’s performance through the application of continuous improvement tools such as TPM. Although it originated from Japan, T ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Certified Maintenance & Reliability Professional (CMRP) Certification

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Optimizing Equipment Maintenance And Replacement Decisions Training

• Is your equipment (fixed or mobile) failing before planned replacement? • Are you unable to execute maintenance tasks because spare parts are not available? • Have you made significant investment in CBM methods and t ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Maintenance Contracting & Outsourcing

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 04-06-2023
Register

Introduction To Maintenance Of Aboveground Atmospheric Storage Tanks (API 653)

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 05-06-2023
Register

Advanced Maintenance Planning And Scheduling & Shutdown, Turnaround And Outage

Maintenance planning and scheduling using structured and systematic approaches are critical for every successful plant. Maintenance planning and scheduling are the fastest and most effective investments that an organizat ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 05-06-2023
Register

Rotating Equipment Controls And Operation

This course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus in the course will be on the start-up and ope ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Maintenance Of Centrifugal Pumps

The course will introduce delegates to the different types of pumps and their associated terminology. Centrifugal pumps, packing, mechanical seals and sealing systems, bearings and couplings will all be discussed. The ap ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Oil & Gas Production Equipment’s Operation, Diagnostics & Maintenance

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any oil and gas production operation. Good fabrication of these components, b ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Pipeline Operations And Maintenance

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this course is to present basic characteristics of efficient operation of pipelines in various engineering app ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Maintenance Of Heavy Equipment

Performing routine maintenance on heavy equipment can keep costs down. Heavy equipment is a large investment and proper maintenance can keep the equipment running properly and significantly extend its useful life. Equipm ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Mechanical Integrity, Safety & Reliability In Refineries, Petrochemical & Process Plants

This course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil and gas plants and petrochemical plants. Principal emphasis is placed on the primary ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Fitness For Service Of Piping, Vessels & Tanks

This course explains all fundamental principles of fitness for service, their practical application through case histories, and a step by step evaluation process for each type of degradation mechanism. The course also gi ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Process Plant Optimization Technology and Continual Improvement

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Fleet Maintenance Management & Inspection

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Maintenance Reliability & Rotating Equipment Engineering

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Protective Coatings Inspection, Maintenance & Repair Techniques

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Maintenance Audit And Site Inspection

This highly interactive training course enables you to develop a powerful vision for asset & maintenance management improvement and improve your abilities to successfully promote and adapt changes in the workplace. You w ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Design & Fabrication Of Storage Tanks In Accordance With API 650

This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Pump System Optimization Overview

Pumping systems account for a significant portion of a facility's energy use in many industries. In the majority of pumping systems, energy added to the working fluid by the pump is much greater than required by the proc ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 11-06-2023
Register

Turnaround Best Practices – Planning, Scheduling And Management Of Shutdowns

This course will introduce participants to proven practices that have been successfully applied in 19 key turnaround areas. The practices for any one area are a composite of practices that have been successfully used by ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 12-06-2023
Register

Advanced Maintenance Planning

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 12-06-2023
Register

Certified Maintenance Planner AICP Certification Exam

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 12-06-2023
Register

Heavy Equipment Operation, Maintenance & Safety

Working with heavy equipments is a very dangerous task and there are several dangers associated with them. This program provides training in the operation of heavy equipment, routine maintenance of machinery and field op ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Managing Shutdowns, Turnarounds And Outages

Planning and managing shutdowns, turnarounds and outages in the process plant environment is a complex and demanding function. If turnarounds are not properly planned, managed and controlled, companies run the risks of s ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)

Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Valve Selection, Maintenance & Repair Masterclass

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Steam Turbine Operation

Steam Turbines of several types, which have widely varying configurations and applications, are used extensively in the process industries. These steam turbines represent a significant part of the capital and operating c ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

STEAM TURBINE FAILURE ANALYSIS INSPECTION AND TROUBLESHOOTING

This Course Has Been Designed for Individuals Who is Familiar with Steam Turbine to Understand and be able to make decisions relating for Steam Turbine Failure Analysis Inspection and Troubleshooting Maintenance and Over ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

MAINTENANCE TASK ANALYSIS (MTA)

MTA is the identification of the steps, spares and materials, tools, support equipment, personnel skill levels as well as any facility issues that must be considered for a given repair task. Also included in the MTA are ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Oil & Gas Platform Supervisory

This training course will cover the methods of supervision of operations and the development of an effective process. The principles of distillation, hydraulics, phase separation, and heat transfer, as they apply to proc ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Advanced Practical Centrifugal Pump

The over-riding aim of the pump and system training course is to reduce the costs associate with owning and running pumps. Organizations spend millions running and repairing pumps. Nine out of ten pumps fails early. If w ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Modern Maintenance Planning, Scheduling & Work Control

The maintenance of physical assets can no longer be treated as an 'engineering problem'. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busin ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Pipeline Repair Techniques

The various aspects of pipeline repair using weld and non-weld methods will be covered, as will the concerns for welding onto in-service pipelines and the approaches used to address them.

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Safety Relief Valve Sizing, Selection, Operation, Inspection, Maintenance & Troubleshooting (PRV & POPRVPORV)

Within the boiler, piping and pressure vessel industry, control and safety relief are of Most essential importance. Pressure relief valves are the last line of defense against Catastrophic failure or even lose of life. ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

HVAC Design, Operation, and Maintenance

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Preventive & Predictive Maintenance

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Refractories Applications, Inspection and Maintenance

Refractories are considered the critical factor for the successful and reliable operation of many high-temperature industrial processes. They are often a major cost item both in general maintenance and also in terms of u ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 18-06-2023
Register

Heat Transfer Equipment

Heat Transfer Equipment or Heat Exchangers simply exchange heat and involves in heat transfer. Fluids or gases are introduced inside the shell side nozzle inlet. Fluids or gases then go through the shell moving through a ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 19-06-2023
Register

Strategic Maintenance Planning

Leading companies view Maintenance as a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, and the cost of production. The ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 19-06-2023
Register

July-2023

Practical Pump Technology (API 610) (Selection, Applications, Operation, Troubleshooting, And Maintenance)

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Reliability Centered Maintenance (RCM)

This course provides the fundamentals of Reliability-Centered Maintenance (RCM). The course is not process specific but gives the participant fundamental tools and knowledge required to participate in any RCM analysis pr ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Building Preventive Maintenance

This training course presents the methods of inspection and evaluation of buildings and diagnosis and reason of concrete deterioration or the corrosion of the steel bars to develop preventive maintenance program. The cau ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Power Generation Gas Turbines, Co-Generation, Combined Cycle Plants, Wind Power Generation And Solar Power

This programme provides a detailed understanding of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants. Each of the components such as compressors, gas and ste ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Pumps, Compressors And Turbines Troubleshooting Training

This course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Modern Maintenance Technologies Overview

This course provides all the delegates great opportunities to optimize the performance of their systems and equipment to achieve maximum return on investment (ROI). By reducing costs and downtime, while achieving high le ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Effective Planned Preventive & Predictive Maintenance

Effective planned & predictive maintenance are critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM TPM, and even 6-Sigma. This course has been designed to benefit ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Maintenance Optimization & Best Practices

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Motor Vehicle Maintenance & Inspection

Proper maintenance includes, among other things, ensuring that lamps and reflectors are working, and tires are not worn. Some example roadside safety violations that may cause road accidents include operating an out-of-s ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Process Plant Start-Up And Commissioning

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. An organisation’s personnel must familiarize themselves with new equipment, processes and technologies, deve ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 02-07-2023
Register

Operation & Maintenance Of Mobile Lifting Equipment

This course will highlight the added value that mobile lifting equipment operation and maintenance can offer to support engineers and technicians working in heavy transportation and lifting, petroleum industries, and con ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 09-07-2023
Register

Risk Based Strategies for Inspection & Maintenance

Risk-Based Inspection (RBI) methodology enables the assessment of the likelihood and potential consequences of pressure equipment failures. RBI provides companies the opportunity to prioritize their equipment for inspect ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 09-07-2023
Register

Equipment Losses & Overall Equipment Effectiveness (OEE)

OEE is the primary measure of performance in TPM. It is calculated by multiplying the availability, efficiency and quality rate of an equipment. This course allows us to understand the 7 major equipment losses encountere ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 09-07-2023
Register

Rotating Equipment Maintenance And Troubleshooting

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 16-07-2023
Register

Maintenance Of Gas Compressors

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 16-07-2023
Register

Essential Methodologies For Maintenance

Why do we have safety or environmental incidents? Why do we suffer mission failures or production shortfalls? Is there a relationship between maintenance and system availability? Can you improve operational performance a ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 16-07-2023
Register

Steam Turbine Control And Maintenance

Upon completion of this course, participants will have gained a thorough understanding of the various steam turbine configurations available to virtually every industrial user. Items discussed include mechanical design f ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 16-07-2023
Register

MAINTENANCE PLANNING, SCHEDULING, AUDITING & BENCHMARKING

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 23-07-2023
Register

Optimizing Equipment & Facilities Maintenance

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 23-07-2023
Register

Maintenance & Operation Of Rotating Equipment

This training program aims at providing the participants with a comprehensive theoretical and practical knowledge, and enhancing their skills for the maintenance and operation of rotating equipment. Emphasis shall be lai ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 24-07-2023
Register

Advanced Reliability Centered Maintenance

Reliability Centred Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 31-07-2023
Register

August-2023

Failure Mode Effect and Criticality Analysis (FMECA) Facilitator Skills Training

This highly interactive BTS training course will focus on the essential skills for a FMECA facilitator, supported by tailor-made exercises and constructive personal feedback. This intensive training course will also enab ...

Read More
  • Muscat
  • 5 -Days
  • USD-5450
  • 06-08-2023
Register

Operation, Diagnostics and Maintenance of Equipment for Oil & Gas Production

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Certified Maintenance & Reliability Technician

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Screw Gas Compressors & Dry Gas Seals Application

This 5-day course offers delegates a comprehensive overview of the design, construction, control and operation of screw compressors of the type normally found in the oil, gas, and other process industries. The course de ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Practical Pump Technology

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Implementing Effective Preventive And Predictive Maintenance

Effectively planned Preventive & Predictive Maintenance which is integrated with the workflow is critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM, TPM, and even ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Plant Reliability Modelling, Analysis And Prediction

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 13-08-2023
Register

Rotating Equipment Reliability Optimization & Continuous Improvement

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Couplings & Shaft Alignment

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or t ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Fleet Maintenance & Replacement Optimizing Life-Cycle

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

ADVANCED PIPELINE RISK MANAGEMENT

Risk management has been embraced by both the pipeline industry and regulatory agencies as a way to not only increase public safety but also to optimize all aspects of pipeline design, operations, and maintenance. This a ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Introduction To Reliability Engineering

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

MARK V, MARK VIE and Gas Turbine

Working with General Electrical “GE” control systems and gas turbine at facilities, attendees in this “hands-on” course will learn the main differences between control system series “MARK V,VI,VIE” , how ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Maintenance, Reliability & Asset Management Technology Best Practices

Maintenance, Reliability and Asset Management Best Practices are critical for every successful individual and company. It is the job of the maintenance professional to optimize the maintenance effort using a structured a ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Building Services Management Best Practices Training program

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 14-08-2023
Register

Alignment Methods & Application

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment. This comprehensive course trains the student in the need for precision shaft alignment and instructs in the popular method ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Total Productive Maintenance (TPM)

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Successful Maintenance Planning & Scheduling High Reliability & Maintenance Performance Techniques

This course is packed with the insights and the powerful techniques of successful maintenance planning and scheduling for high equipment reliability. The comprehensive content gives you best practice maintenance planning ...

Read More
  • Jeddah
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Operational Excellence Masterclass (OE)

This comprehensive course includes the work processes and the business systems needed to coordinate and achieve maximum production plant and equipment performance. You will find out how to institute the vital practices a ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Optimizing Equipment Maintenance & Replacement Practices

Major world companies from the process and petrochemical industry have developed their maintenance practices based on the optimization of predictive maintenance management system. This approach works well for both statio ...

Read More
  • Dammam
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Process Plant Start-Up Commissioning And Troubleshooting

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

Read More
  • Dubai
  • 10 -Days
  • USD-9810
  • 20-08-2023
Register

Reliability Centered Maintenance (RCM) For FM Personnel

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Pump Technology Pump Overhauling

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

Read More
  • Salalah
  • 5 -Days
  • USD-5450
  • 20-08-2023
Register

Upstream Oil & Gas Asset Management

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 21-08-2023
Register

Computerized Maintenance Management Systems (CMMS Success Strategy)

This course is intended to show how Advanced Maintenance Techniques to a Successful Strategy in implementation of a Computer Maintenance Management System. This is for the participant who is looking for ways to get more ...

Read More
  • Amsterdam
  • 5 -Days
  • USD-5950
  • 21-08-2023
Register

Cost Effective Maintenance Management Driving Maintenance Performance To A Higher Level

Cost Effective Maintenance Management is an advanced maintenance management program that builds on the concepts introduced in other maintenance management programs such as Maintenance Work Planning and Control. Cost Eff ...

Read More
  • London
  • 5 -Days
  • USD-5950
  • 21-08-2023
Register

Maintenance Errors Understanding, Identifying and Managing the Human Factor

Human factors are by far the largest cause of failures and incidents in maintenance. This goes not only for branches like aviation, but also for chemicals, oil & gas, energy and transportation. Investigation shows that a ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 21-08-2023
Register

Advanced Transport & Fleet Management

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

Read More
  • Kuala-Lumpur
  • 5 -Days
  • USD-5950
  • 21-08-2023
Register

Applying Reliability Engineering Principles To Process Equipment Maintenance

The course is designed to bridge the gap between the rather theoretical subject of "Reliability Engineering" (RE) and day-to-day equipment maintenance practice by emphasizing the common goals of RE and Maintenance. It w ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

FPSO Operation And Maintenance (Floating Production Storage And Offloading)

For the successful operation of the FPSO it is of vital importance to understand the process from the wellhead through the topside process, storage and offload. Often putting together an operations team receives scarce p ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Practical Hydraulic Systems Operation And Troubleshooting

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

DATA ANALYSIS TECHNIQUES FOR ENGINEERS & TECHNOLOGISTS

Corporate ethos which sees change as a survival necessity coupled with continual demands to achieve greater production efficiencies and reduced operating / maintenance costs, means that engineers and technologists are fa ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Effective Contractor Management in Maintenance & Technical Projects

This highly interactive Contractor Management training course will ensure that delegates understand how contractor management will fit in the Asset Management context - how to select the right contractor and contract typ ...

Read More
  • Riyadh
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Performance Monitoring Of Pumps & Compressors

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Reliability Excellence For Managers Workshop

Reliability Excellence for Managers (RxM) teaches the true meaning of reliability, as well as the tools and processes required to develop, implement and sustain world-class reliability-based performance and a culture of ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Pumps & Compressors Predictive Maintenance & Diagnostics

Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive unders ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Advanced Practical Pumping Technology

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Refinery Shutdown & Turnaround

Refineries extreme safety and continuous operation constriction requirements demand properly designed and executed shutdowns together with increase in efficiency with the use of latest technologies place massive importan ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Condition Monitoring & Vibration Control Of Machines Plants

This training program is designed to provide valuable information on machine condition monitoring as a tool for quickly identifying and correcting the root causes of machinery problems, achieving precise operation, and i ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Introduction To ASME Process Piping Code

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Preventive & Predictive Maintenance (PPM)

Preventive and predictive maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools and equipment. The sudden troubles are very potential th ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Introduction To Maintenance Of Aboveground Atmospheric Storage Tanks (API 653)

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 27-08-2023
Register

Maintenance Engineering A Modern Approach

At the end of this course the attendees will gain the knowledge about maintenance, computerized maintenance programs & maintenance planning basic concepts including maintenance background overview and the human factor in ...

Read More
  • Indonesia
  • 5 -Days
  • USD-5950
  • 28-08-2023
Register

Advanced Vibration Monitoring, Analysis & Balancing ( Bentley Nevada Application )

In today’s highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use ...

Read More
  • Istanbul
  • 5 -Days
  • USD-5950
  • 28-08-2023
Register

September-2023

Preventive & Predictive Maintenance

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Gas Compressors Maintenance & Monitoring Of Operation & Performance

This course will present the key activities involved in operation, control, maintenance and troubleshooting of gas compressors. These activities are vitally important for the efficient and safe operation of the plant. Th ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Maintenance Of Process Plant And Equipment

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Process Plant Optimization Technology and Continual Improvement

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

RO Feed Pump Tech. & Maintenance

Tending to System Maintenance is Necessary for Successful Operation Understanding and reacting to the performance of a reverse osmosis (RO) system is necessary for continued successful operation. It is this interaction ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Certified Maintenance Planner AICP Certification Exam

Maintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits fr ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Reliability Centered Maintenance Overview

Risk-Based Reliability Centered Maintenance (RCM) sets out to highlight and formalize the identification, categorization and management of risk as part of the development of failure management and maintenance management ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Maintenance & Reliability Best Practices & Cost Effective Implementation

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

Read More
  • Manama
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Construction, Operations & Maintenance Management

The objective of the course is to provide an integrated program covering the key areas of Operations & Maintenance Management concerned with Planning, Scheduling and Total Productive Maintenance. The program aims to prov ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Plant Operation, Troubleshooting, And Maintenance

Industrial processes today operate on very large scales with the advent of modern industrial plants. Such plants sometimes operate hundreds of equipment, not to mention thousands of instruments for the measurement and co ...

Read More
  • Cairo
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register

Corrosion Monitoring & Inspection Methods Control In Gas, Oil & Water

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

Read More
  • Dubai
  • 5 -Days
  • USD-5450
  • 03-09-2023
Register