Egypt , Cairo |
|||
|---|---|---|---|
.jpg)
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
.png)
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
.jpg)
|
Read More |
|
Register |
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
.jpg)
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
.jpg){kind=spacer}
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
.jpg)
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
.jpeg)
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
Saudi Arabia , Jeddah |
|||
|---|---|---|---|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
.jpg)
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
.jpg)
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
.jpg)
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
Turkey , Istanbul |
|||
|---|---|---|---|
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
.png)
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
.jpg)
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
.jpg)
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
Read More |
|
Register |
.jpg)
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Read More |
|
Register |
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
.jpg)
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
.jpg)
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
.jpg)
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
.jpg)
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
.jpg)
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
Malaysia , Kuala-Lumpur |
|||
|---|---|---|---|
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
.jpg)
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
.jpg)
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
.jpg)
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
United Kingdom , London |
|||
|---|---|---|---|
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
UAE , Dubai |
|||
|---|---|---|---|
|
|
Read More |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Read More |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
Oman , Muscat |
|||
|---|---|---|---|
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
Indonesia , Indonesia |
|||
|---|---|---|---|
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
Bahrain , Manama |
|||
|---|---|---|---|
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Read More |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Read More |
|
Register |
Jordan , Amman |
|||
|---|---|---|---|
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
Morocco , Marrakesh |
|||
|---|---|---|---|
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
Switzerland , Geneva |
|||
|---|---|---|---|
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Read More |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
Nethersland , Amsterdam |
|||
|---|---|---|---|
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
BTS keen to selects highly technical instructors based on professional field experience
Since BTS was established, it considered a training partner for world class oil & gas institution
1st floor, Incubator Buildingو Masdar City, Abu Dhabi, UAE
Sun to Fri 09:00 AM to 06:00 PM
Contact Us anytime!