Malaysia , Kuala-Lumpur |
|||
|---|---|---|---|
.jpg)
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
.jpg)
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
.jpg)
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
Indonesia , Indonesia |
|||
|---|---|---|---|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
Nethersland , Amsterdam |
|||
|---|---|---|---|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
((FMP)) FACILITY MANAGEMENT PROFESSIONALThe FMP can help you gain a competitive advantage and improve your job performance through education and recognition. You will build practical skills you can apply to your job immediately, resulting in cost-savings and a ... |
|
Register |
|
|
((FMP)) FACILITY MANAGEMENT PROFESSIONALThe FMP can help you gain a competitive advantage and improve your job performance through education and recognition. You will build practical skills you can apply to your job immediately, resulting in cost-savings and a ... |
|
Register |
UAE , Dubai |
|||
|---|---|---|---|
.png)
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
.jpg){kind=spacer}
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
.jpg)
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
.jpeg)
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
.jpg)
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
.jpg)
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
.png)
|
Advanced Cathodic Protection TechniquesCathodic protection (CP) is a proven method for preventing corrosion in steel structures exposed to aggressive environments such as seawater, soil, and concrete. This course provides a comprehensive understanding of CP p ... |
|
Register |
.jpg)
|
Read More |
|
Register |
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
.jpg)
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
.jpg)
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
.jpg)
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
.jpg)
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
.jpg)
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
Read More |
|
Register |
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
.jpg)
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
.jpg)
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
.jpg)
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offs ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
.jpg)
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Advanced Cathodic Protection TechniquesCathodic protection (CP) is a proven method for preventing corrosion in steel structures exposed to aggressive environments such as seawater, soil, and concrete. This course provides a comprehensive understanding of CP p ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
((FMP)) FACILITY MANAGEMENT PROFESSIONALThe FMP can help you gain a competitive advantage and improve your job performance through education and recognition. You will build practical skills you can apply to your job immediately, resulting in cost-savings and a ... |
|
Register |
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
.jpg)
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
.jpg)
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Read More |
|
Register |
.jpg)
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offs ... |
|
Register |
Morocco , Marrakesh |
|||
|---|---|---|---|
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Advanced Cathodic Protection TechniquesCathodic protection (CP) is a proven method for preventing corrosion in steel structures exposed to aggressive environments such as seawater, soil, and concrete. This course provides a comprehensive understanding of CP p ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
Oman , Muscat |
|||
|---|---|---|---|
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
Saudi Arabia , Riyadh |
|||
|---|---|---|---|
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
Jordan , Amman |
|||
|---|---|---|---|
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
((FMP)) FACILITY MANAGEMENT PROFESSIONALThe FMP can help you gain a competitive advantage and improve your job performance through education and recognition. You will build practical skills you can apply to your job immediately, resulting in cost-savings and a ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
Egypt , Cairo |
|||
|---|---|---|---|
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Advanced Cathodic Protection TechniquesCathodic protection (CP) is a proven method for preventing corrosion in steel structures exposed to aggressive environments such as seawater, soil, and concrete. This course provides a comprehensive understanding of CP p ... |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offs ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
Qatar , Doha |
|||
|---|---|---|---|
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
Bahrain , Manama |
|||
|---|---|---|---|
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Advanced Cathodic Protection TechniquesCathodic protection (CP) is a proven method for preventing corrosion in steel structures exposed to aggressive environments such as seawater, soil, and concrete. This course provides a comprehensive understanding of CP p ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offs ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
((FMP)) FACILITY MANAGEMENT PROFESSIONALThe FMP can help you gain a competitive advantage and improve your job performance through education and recognition. You will build practical skills you can apply to your job immediately, resulting in cost-savings and a ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Read More |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
Turkey , Istanbul |
|||
|---|---|---|---|
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offs ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
United Kingdom , London |
|||
|---|---|---|---|
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
BTS keen to selects highly technical instructors based on professional field experience
Since BTS was established, it considered a training partner for world class oil & gas institution
1st floor, Incubator Buildingو Masdar City, Abu Dhabi, UAE
Sun to Fri 09:00 AM to 06:00 PM
Contact Us anytime!