November-2024 |
|||
|---|---|---|---|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
.jpg)
|
Read More |
|
Register |
.jpg)
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
.jpg)
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
.jpg)
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
.jpg)
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
.jpg)
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
.jpg)
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
Read More |
|
Register |
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
December-2024 |
|||
|---|---|---|---|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
.jpg)
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
.png)
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
.jpg)
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
.jpg)
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
.jpeg)
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
.jpg)
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
Read More |
|
Register |
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
.jpg)
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
.jpg)
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
.jpg)
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
.jpg){kind=spacer}
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
.jpg)
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
.jpg)
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
January-2025 |
|||
|---|---|---|---|
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
February-2025 |
|||
|---|---|---|---|
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
.jpg)
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
April-2025 |
|||
|---|---|---|---|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
.jpg)
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Read More |
|
Register |
May-2025 |
|||
|---|---|---|---|
|
|
Read More |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
.jpg)
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
June-2025 |
|||
|---|---|---|---|
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
.png)
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
July-2025 |
|||
|---|---|---|---|
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
August-2025 |
|||
|---|---|---|---|
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Read More |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
September-2025 |
|||
|---|---|---|---|
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
October-2025 |
|||
|---|---|---|---|
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
API 580 & 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
November-2025 |
|||
|---|---|---|---|
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
API 936: Refractory Inspection Code: Installation, Inspection, Testing & Repair (API Exam Preparation Training)This course discusses the design, installation, inspection, and repair of refractory systems for processing & power generation applications in pressure vessels, piping systems, and fired equipment. The discussions includ ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Design & Maintenance Of Aboveground Atmospheric Storage Tanks (API 650)Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ... |
|
Register |
|
|
Read More |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Read More |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
December-2025 |
|||
|---|---|---|---|
|
|
Design & Fabrication Of Storage Tanks In Accordance With API 650This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
ASME VIII Division 1 - New Vessels ConstructionASME BPV Code, Section VIII, Division 1 deals with requirements applicable to the design, fabrication, inspection and testing of pressure vessels operating internally or externally. This pressure may be obtained from an ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Protective Coatings Inspection, Maintenance & Repair TechniquesThis course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
BTS keen to selects highly technical instructors based on professional field experience
Since BTS was established, it considered a training partner for world class oil & gas institution
1st floor, Incubator Buildingو Masdar City, Abu Dhabi, UAE
Sun to Fri 09:00 AM to 06:00 PM
Contact Us anytime!