Advanced Drilling Best Practices
Course Description
Today's drilling personnel must have a working knowledge of all the required disciplines in order to effectively drill a well. The course provides all the fundamentals necessary to drill a well whether it is a shallow well or a complex, high pressure well. The course is also designed for engineers and field personnel involved in the planning and implementation of drilling programs. The course covers all aspects of drilling technology, emphasizing both theory and practical application. Computer programs are used to design many aspects of the modern well and the course will provide the participants with the theory behind most programs along with practical implementation. The course will also include advanced Mud Logging principles and operations. This course builds a firm foundation in the principles and practices of drilling and well planning, drilling fluid, drill string design, hydraulic optimization and drilling hole problems. Participants will learn the components of drilling string and how to use each in optimum ways, how to evaluate the WOB and select the proper size of drill collar. Participants will also be able to apply the practical solution for analyzing the performance of drill string design for both vertical and direction holes.
The Training Course Will Highlight ?
Training Objective

By the end of this BTS training course, participants will be able to:

  • Drill a well cost effectively and maximize penetration rate &  Evaluate stuck pipe problems and avoid potential problems by optimizing hole cleaning and ROP
  • Design, drill string and BOP/wellheads & Design and implement bit and hydraulics programs
  • BHA design for proper deviation, directional and horizontal drilling control & Recognize and evaluate well control problems by effectively using Mud Logging principles and techniques

Target Audience

Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Drilling Superintendents, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production and Completion Engineers, Foremen, Work over Engineers, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Industry Personnel, Lifting Personnel, Maintenance Engineers, Technologists, Mud Engineers, Well Site Supervisors, Drilling Contractors, Drilling Supervisors, Completion Engineers, Completion Supervisors, Drilling Managers, Drilling Technical Support Personnel, Trainee Drillers, Rig Engineers, Industry Personnel

Training Methods

This interactive Training will be highly interactive, with opportunities to advance your opinions and ideas and will include;

  • Lectures
  • Workshop & Work Presentation
  • Case Studies and Practical Exercise
  • Videos and General Discussions

Daily Agenda

Drilling Hole Problems and Practical Solutions

  • Hole problems (stuck pipe, lost circulation)
  • Impact of hole cleaning on hole problems
  • Stuck pipe types
  • Formation and problems related
  • Good recommendations of drilling practices and preventive measurements
  • Fishing tools and impact on stuck pipe
  • Lost circulation and types
  • Materials used to solve the problems
  • Recommendations and procedures
  • Losses in and not in the reservoir
  • New plug setting technique for healing sever loss
  • How to solve the problem?

 Preventing Wash Out and Twist Off

  • How you can prevent washouts?
  • How do you analyze the true pressure loss of a washout?

Bit Selection and Hydraulics Application, Including Nozzle Selection

  • Bit Types
  • Rolling Cutter Bits          
  • Polycrystalline Diamond Bits
  • Standard classification of Bits
  • Preparing the bit to be run in hole
  • Running in hole and drilling out cement and plugs
  • Breaking the bits
  • Fundamental parameters discussion
  • Optimizing drilling performance
  • Drill off test
  • Drill string dynamic / vibration
  • Factors related to bit run termination
  • Bit hydraulic

BHA and Drill String Design, Selection of Casing Seats, BOP Equipment

  • Drill strings
  • Functions of Drill Pipe, Drill Collars and BHA selection
  • Grades of Drill Pipe and strength properties
  • Thread types and tool-joints
  • Drill collar weight and neutral point
  • Basic design calculations based on depth to be drilled.
  • Functions of stabilizers and roller reamers

Drilling Fluids Planning and Control, Routine and Special Problems

  • Lifting capacity of drilling fluids, pressure losses in the circulating system and ECD
  • Functions of the drilling fluid , Impact of hydraulic on the drilling optimization
  • Parameters affecting on the drilling penetrations
  • Drilling fluid properties, Functions of drilling fluid
  • Mud properties and problems related to mud properties
  • Seepage losses control

Well Control & Hydro-Dynamic Pressure

  • Well control
  • Three Phases of well control
  • Hydro-dynamic pressure 
  • Equivalent circulating density
  • Mud weight maintenance 
  • Second line of defense     
  • Induced Kick
  • Kick detection team
  • Causes of kicks while drilling
  • Indication of induced kicks
  • Diverter guidelines while drilling
  • Best kill procedure for kick type
  • Kick control team
  • Removing gas trapped below the BOP
  • Causes of kicks while tripping
  • Diverter guidelines while tripping
  • Evaluating the off bottom kick condition
  • Strip and bleed guidelines
  • Volumetric Guidelines
  • Dynamic lubricates and bleed guidelines
  • Third line of defense (Underground blowout)
  • Kick detection in oil base mud
  • Operations that can mask a kick
  • Well control kill sheet

Planning Including Mud Logging Requirements

  • Introduction
  • Modern mud logging unit
  • Petroleum engineering services
  • Gas analysis
  • Cutting evaluation
  • Shale bulk density
  • Shale factor
  • Flow line temperature
  • Drilling Models
  • Petro physical measurements
  • Drilling porosity
  • Selection a mud logging service
Accreditation

BTS attendance certificate will be issued to all attendees completing minimum of 80% of the total course duration.

Quick Enquiry

Request Info

Download Brochure Request In house Proposal

Course Rounds : (5 -Days)


Code Date Venue Fees Register
DE142-03 24-06-2024 Istanbul USD 5950
DE142-04 08-09-2024 Manama USD 5450
DE142-06 24-11-2024 Dubai USD 5450
Prices doesn't include VAT

UpComing Date


Details
  • Start date 24-06-2024
  • End date 28-06-2024

Venue
  • Country Turkey
  • Venue Istanbul

Quality Policy

 Providing services with a high quality that are satisfying the requirements
 Appling the specifications and legalizations to ensure the quality of service.
 Best utilization of resources for continually improving the business activities.

Technical Team

BTS keen to selects highly technical instructors based on professional field experience

Strengths and capabilities

Since BTS was established, it considered a training partner for world class oil & gas institution

Search For Available Course

Abu Dhabi, UAE

1st floor, Incubator Buildingو Masdar City, Abu Dhabi, UAE

00971-2-6446633

Sun to Fri 09:00 AM to 06:00 PM

info@btsconsultant.com

Contact Us anytime!