By the end of this course delegates will be able to:

• • Gain an understanding of the principles and basic practice of reservoir engineering
  • Determine critical properties of reservoir rocks fluid (oil, water, and gas) PVT relationships
  • Calculate hydrocarbons initially in place using several methods
  • Assess reservoir performance with dynamic techniques
  • Determine the parameters that impact well/reservoir performance over time
  • Analyze well tests using standard well testing principles and techniques
  • Characterize aquifers
  • Determine reservoir drive mechanisms for both oil and gas reservoirs
  • Apply oil and gas field development planning principles
  • Forecast production decline

Geologists, Geophysicists, Petrophysicists working in exploration and exploitation, engineers anyone who are relatively new to the industry, but who have some background in reservoir geology and the production of hydrocarbons 

This interactive Training will be highly interactive, with opportunities to advance your opinions and ideas and will include;

• Lectures
• Workshop & Work Presentation
• Case Studies and Practical Exercise
• Videos and General Discussions

Course Outline:

• • Introduction to reservoir engineering 
  • Role of reservoir engineer in E&P Interaction with other petroleum engineering disciplines 
  • Definition of reservoir pressure 
  • Determination of pressure gradients 
  • Identification of contacts 
  • Effect of capillary pressure on contact 
  • Areal variation in reservoir pressure 
  • Definitions of reservoir porosity, permeability, capillary pressure 
  • Review of core analysis methods to determine rock properties 
  • Effect of stress on properties 
  • Interaction of rock and fluids - relative permeability effects 
  • Measurement of relative permeability 
  • Correlation of permeability measurements - laboratory and welltest 
  • Effect of vertical variations in permeability on gas/water/oil saturation
  • Composition of reservoir fluids 
  • Molecular basis for variation in hydrocarbon content of a reservoir 
  • Examination of the fluid physical changes in the reservoir during production 
  • Variations in number and saturation of each hydrocarbon phase 
  • Physical and mechanical properties of reservoir hydrocarbons 
  • Measurement of properties 
  • Determination of state parameters for each phase 
  • Introduction to fluid flow in the reservoir 
  • Estimation of average pressure 
  • Development of diffusivity equation 
  • Application of diffusivity equation to steady state, semi-steady state and unsteady state flow 
  • Applications of line source solution to determine reservoir pressure
  • Extension of line source solution to well testing 
  • Overview of well testing techniques Use of well testing in determining average reservoir pressure, productivity index, permeability 
  • Use of Horner equation 
  • Understanding reservoir energy - drive mechanisms: water drive, gas cap drive, solution gas drive, gravity segregation, Vapour liquid equilibrium 
  • Effect of composition on equilibrium 
  • Variation with temperature 
  • Application of deviation factor to ideal gas law 
  • Downhole and surface fluid sampling 
  • Measurement of PVT parameters 
  • Presentation of data to produce formation volume factors, gas oil ratios, compressibilities
  • Concept of reservoir as a single tank 
  • Definition of material balance equation for combination drive reservoir 
  • Limitations on use of material balance equation 
  • Determination of most effective drive mechanism 
  • Examination of water influx

BTS attendance certificate will be issued to all attendees completing minimum of 80% of the total course duration.